Pitched Roof (Non-Habitable)

Manufacturer:Stewart Milne Timber Systems
Model:Pitched Roof (Non-Habitable)
Revision:1
CI/SFB CODE:(13)
UNICLASS:Ss_30_12_85_18
OMNICLASS:23-13 35 23 11 11
Website:timbersystems.stewartmilne.com/
Software:Revit 2015
Last Updated:16 Jun 2017
Embed: Click to get code
Bim, content,object,component,BIM, Store, Revit, stewart,milne,timber,systems,frame,pitched,roof,non,habitable,solutions,conventional,pre-formed,trussed,rafter,pre-frabricated,gable,ladder,spandrel,panels,diminishing,pre-cut,hip,safety,deck,ceiling,
Bim, content,object,component,BIM, Store, Revit, stewart,milne,timber,systems,frame,pitched,roof,non,habitable,solutions,conventional,pre-formed,trussed,rafter,pre-frabricated,gable,ladder,spandrel,panels,diminishing,pre-cut,hip,safety,deck,ceiling,
Bim, content,object,component,BIM, Store, Revit, stewart,milne,timber,systems,frame,pitched,roof,non,habitable,solutions,conventional,pre-formed,trussed,rafter,pre-frabricated,gable,ladder,spandrel,panels,diminishing,pre-cut,hip,safety,deck,ceiling,
Bim, content,object,component,BIM, Store, Revit, stewart,milne,timber,systems,frame,pitched,roof,non,habitable,solutions,conventional,pre-formed,trussed,rafter,pre-frabricated,gable,ladder,spandrel,panels,diminishing,pre-cut,hip,safety,deck,ceiling,
Bim, content,object,component,BIM, Store, Revit, stewart,milne,timber,systems,frame,pitched,roof,non,habitable,solutions,conventional,pre-formed,trussed,rafter,pre-frabricated,gable,ladder,spandrel,panels,diminishing,pre-cut,hip,safety,deck,ceiling,
Bim, content,object,component,BIM, Store, Revit, stewart,milne,timber,systems,frame,pitched,roof,non,habitable,solutions,conventional,pre-formed,trussed,rafter,pre-frabricated,gable,ladder,spandrel,panels,diminishing,pre-cut,hip,safety,deck,ceiling,

Further Information

Stewart Milne Timber Systems provides a range of conventional pre-formed trussed rafter solutions. These include pre-fabricated roof trusses, with all gable ladders, spandrel panels, diminishing trusses and pre-cut hip floor materials and infill timbers. Truss rafter solutions are common place and require a safety deck to be installed during construction. Typically roofs are installed using a crane and are installed in component format on the timber frame wall head.

Where higher levels of air tightness are required a separate air tightness membrane and batten is required, taped and sealed at perimeters and intermediate edges, as a separate return visit after the building is water tight. 

Ground roof erect, in some circumstances space permitting, it is possible to pre-form the roof as a module at ground level, felted and battened and lifted as a roof module direct onto the timber frame wall head, without need for a safety deck system. Typically the timber frame is erected beforehand, whilst the roof module is be made on site beforehand.

This download contains Revit components for the Stewart Milne Timber Systems concrete ground floor solutions. Content includes a number of variations including;

  • Ceiling and Rafter systems
  • Trussed Rafter format
  • With and without air tightness membrane
  • 30 minute fire rated
  • 6no. roof (non-habitable) types variations in total. 

Please note Stewart Milne Timber Systems provides a complete in-house design service to assist architects and designers in the specification and modelling of your projects. Please contact Stewart Milne Timber Systems for additional guidance and to utilise this service.

Why not leave a Review

This is your chance to have your say. Have you enjoyed using this component. Let us know!

Other peoples comments

x

Check out Bimstore Eye!

BimstoreEye is our new Augmented reality application for your phone or tablet, download it and watch bimstore content pop up from manufacturers literature! Download it now on iOS!

Mascot